Operating steps of the Autoclave Sterilizer

Autoclave Sterilizer is a device that uses saturated pressure steam to quickly and reliably sterilize items. This article will introduce the relevant knowledge of Autoclave Sterilizer, hoping to help everyone.

• Procedure for the operation of an Autoclave Sterilizer.

• The company has X-ray machine products.

Procedure for the operation of an Autoclave Sterilizer.

1. First, take out the inner sterilization barrel, and then add an appropriate amount of water to the outer Autoclave Sterilizer to make the water surface level with the triangular shelf.

   
   

2. Return to the Autoclave Sterilizer sterilization bucket and load with the items to be sterilized. Be careful not to pack too much, so as not to hinder the flow of steam and affect the sterilization effect.

   
   

3. Put the cap on, and insert the capped exhaust hose into the exhaust slot of the inner sterilization barrel. Tighten the opposite two bolts at the same time in a symmetrical manner, so that the bolts are tight and consistent, and do not leak air.

   
   

4. Turn on the power to heat, and at the same time open the vent valve to bring the water to a boil to remove cold air from the Autoclave Sterilizer pan. After the cold air is completely exhausted, close the exhaust valve and let the temperature in the Autoclave Sterilizer pot gradually rise as the steam pressure increases. When the pressure in the Autoclave Sterilizer pot rises to the required pressure, control the heat source and maintain the pressure for the required time.

   
   

5. When the time required for sterilization is up, cut off the power supply or turn off the gas, and let the temperature in the sterilization Autoclave Sterilizer drop naturally. When the pressure of the pressure gauge drops to 0, open the exhaust valve, loosen the bolt, and open the lid. Remove sterilized items.

The company has Autoclave Sterilizer products.

Healicom Medical Equipment Co. Ltd. has an excellent after-sales service team to ensure that customer after-sales problems are solved in the first time. Thanks to our excellent technical team, we are able to design according to customers' requirements. We have more than 10 advanced production lines, which can easily do mass production and offer you the best price. Healicom Medical Equipment Co., Ltd. is a leading supplier in China. We have supported you from the beginning. Not only do we offer a wide range of products for every need, but our team of experts can also help you with custom medical solutions. The most important requirement for medical products is quality. To ensure that only the highest quality products are provided, we work with the most qualified factories.

We offer HTS-D 12L 16L 18L 23L 29L Pulse Vacuum Bench Top Steam Autoclave Sterilizer High, HTS-C 35L 50L Benchtop Pressure Steam Autoclave Sterilizer, HTS-A 20L 24L Bench Top Pressure Steam Autoclave Sterilizer and many more.

If you are satisfied with our company's Autoclave Sterilizer, you can directly order or consult the relevant questions of the Autoclave Sterilizer. We will provide you with the best Autoclave Sterilizer products and services and look forward to your visit.