1. Servo Control Mode: air temp, skin temp;
2. Instant Parameter Displaying: set temp, air temp ,skin temp, heater power rate;
3. Audible & Visual Alarms: power failure, sensor failure, higher & lower temp, air& skin temp override, fan failure, system failure;
4. >37°C Preset Mode: power failure reset memory, alarm silence, keypad lock, self-test function;
5. Hood with dual slope: 6 hand-ports; left & right cabinets, top-shelf;
6. RS-232 Output Connector (Use for network system)
110 / 120 V ac, 50Hz / 60Hz
220 / 240 V ac, 50Hz / 60Hz
Refer to IEC60601-1, this equipment belongs to ClassⅠ, Type BF
Its operation is continuous
Power Failure: Activates if primary power to the Incubator fails or the power wire is accidentally disconnected from the wall receptacle
Fan Failure: Activates if Fan motor malfunctions
Air Sensor Failure: Air Sensor malfunction, refer unit to service
Sensor Out of Position: Activated when Sensor is not in correct position to perform calibration or continue operation
Skin Sensor Disconnected: Activated during Skin Control Mode when Skin Sensor is disconnected from Temperature Controller
Skin Sensor Failure: Activated when Skin Sensor malfunctions
High Air Temperature: Activated if displayed Air Temperature is 15°C above set point
Low Air Temperature: Activated if displayed Air Temperature is 25°C below set point
High Skin Temperature: Activated if displayed Skin Temperature is 10°C above set point
Low Skin Temperature: Activated if displayed Skin Temperature is 10°C below set point
Over Temperature Alarm
Over Air Temperature: Activated when displayed Air Temperature was approach 38°C for set temperature ≤37°C, or approach 40°C for set temperature >37°C in Air Mode
Over Skin Temperature: Activated when displayed Skin Temperature was approach 38°C for set temperature ≤37°C, or approach 39°C for set temperature >37°C in Skin Mode
System Failure: Activated if Temperature Control System malfunctions
Temperature Control Range and Correlative Specifications
20°C~37°C,for set temperature ≤37°C, 37°C~39°C, for set temperature >37°C
20°C~37°C,for set temperature ≤37°C, 37°C~38°C, for set temperature >37°C
Temperature Rise Time
Skin Sensor Precision
Operation Temperature Range
Store Temperature Range
Operation Humidity Range
Store Humidity Range
Atmospheric Pressure Range
Noise Level Within Hood Environment
≤55dB(Environment noise below 45dB)
Carbon Dioxide (CO2) Level within the Hood
Less than 0.5% when a mixture of CO2 in air is delivered at 750ml/min at a point 10cm above the center of the mattress
Air Velocity Over Mattress
less than 0.3m/s
Infant Bed Max Load
Transfusion Shelf Max Load
Cabinet Max Load
Function of “SILENCE” Key
Make the alarm to be silence for 10 minutes by press this key
Factory Default Settings
Temperature Control Mode Air Temperature Mode
Air Set Temperature: 32°C
Skin Set Temperature: 34°C
1.What is time of delivery?
Since our products are produced according to each specific order, the delivery period will be 7-8 days after receiving your payment.
2.What about quality assurance?
We offer 1 year warranty period beginning from the time of shipment for medical equipment.
3.What about the price level?
Our prices are competitive compared with those at the same quality level, and we keep striving to provide the best pricing to our customers.
4.What is payment term?
T/T in advance, Western Union, Paypal, Credit card etc.
5.What transportation way does your company usually use?
By ship, airplane, express etc.