Rated Capacity | 80KVA |
Input Voltage(V) | 380V±20% |
Output Voltage(V) | 380V±2.5%(Adjustable) |
Output Current | 122A |
Efficiency | ≥98% |
Response Time | ≤100ms |
Stable Time | When input jump is less than 10%of the rated value,the settling time is |
Working Frequency | 50Hz-60Hz |
Insulation Grade | F,Max.Temperature:155DEG C | |||
Insulation Strength | 2000V,No breakdown in one minute | |||
Insulation Resistance(MΩ) | ≥2 | |||
Overload Capacity | 3 times rated current can maintain 1min | |||
Operative Code | Fully automatic;long-time running;power/stabilizer free switch | |||
Display | Current,voltage using LED digital display;man-machine dialogue interface,status,abnormal indicator display | |||
Environment Temperature | -10 to +45 DEG C,the highest monthly average temperature is less than 35 DEG C | |||
Waveform Distortion | ≤0.1%,No additional waveform distortion | |||
Stabilization Precision | ±(1-5)%(Adjustable) | |||
Protection Class | IP21 | |||
Reference Size &weight | 610*910*1350(W*D*Hmm) | |||
Protection | Over/under voltage protection | When the input voltage exceeds the value of over/under voltage,the stabilizer will protect automatically | ||
Over current | When the current exceeds the rated value,automatically cut off the input | |||
Overload and short circuit protection | When the load exceeds the overload value or short circuit of the equipment,it can cut off the power supply within the specified time; | |||
Position Limitation Protection | When the brush is running over the area,automatically stop adjustment; | |||
Bypass Protection | When the voltage stabilizer needs maintenance or in failure,the switch can be switched manually in the power supply; | |||
Effective sampling circuit control | High accuracy,good sensitivity,frequency characteristic measurement,good rate,high input impedance,low output impedance,wide range and low power consumption power supply | |||
Circuit Function | When the sampling voltage is lower than the lower reference voltage or higher than the upper limit voltage, the brush will automatically return to the center; | |||