The unit is a device for the hospital's consultation, treatment and surgical use. It applies to X-ray inspection. The surface of the bed is made of medical fiberboard. The advantage is that the material absorbs very little amount of x-ray and the x-ray absorbed is well-distributed; there is little image loss of fluoroscope. It is used specially for diagnostics and photography with high frequency mobile x-ray photography system.
The bed can rotate in 360°flexibly and the foot switch brakes quickly. The bed is low so it can satisfy the need of seriously-ill patient for special check. The linear movement range of grid box is large and the bed has hand switch. The longitudinal center of bed is in accord with grid box center, which ensures the symmetry of photography and filming.
Working conditions of machine
|Environment temperature||10ºC ~40 ºC|
|Relative humidity||30 % - 75 %|
|Atmospheric pressure||70 - 106KPa|
|No corrosive and explosive gas and dust|
Main Technical Parameters
1 Parameter of the bed: 200cm X 70cm X50cm (length X width Xheight)
2 Range of grid box movement in the bed≤1210mm
3 Size of grid box: 430x430mm(17″x17″)